readme.md (1497B)
1 # Battleship Gamepad 2 3  4 5 A hand-wired 3d-printed mechanical keyboard intended for one hand with an analog thumbstick for movement. The layout matches the left side of large "battleship" keyboards with their extra bank of 2x5 1u F keys. 6 7 Build instructions and 3d printer files can be found in the [project github repo](https://github.com/abraini-Nascent/battleship_gamepad) 8 9 * Keyboard Maintainer: [arbraini](https://github.com/abraini-Nascent) 10 * Hardware Supported: Arduino Pro Micro 11 * Features: 40 keys in an ortho layout and an analog thumbstick. 12 13 Make example for this keyboard (after setting up your build environment): 14 15 make handwired/battleship_gamepad:default 16 17 Flashing example for this keyboard: 18 19 make handwired/battleship_gamepad:flash 20 21 ## Bootloader 22 23 Enter the bootloader in 3 ways: 24 25 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key in the 2x5 bank) and plug in the keyboard. 26 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead. 27 * **Keycode in layout**: Press the key mapped to `QK_BOOT`. In the default layout this is the key at (0,0) on layer 1. 28 29 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).