qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1426B)


      1 # bstk100
      2 
      3 BUFFALO USB 10-Key keyboard BSTK100 modification by Pro Micro and QMK firmware .  
      4 see [[FREE WING HOME PAGE]](http://www.neko.ne.jp/~freewing/) for more detail .  
      5 
      6 ![bstk100](https://i.imgur.com/9s5kxSB.jpeg)
      7 ![bstk100](https://i.imgur.com/rsilkiy.jpeg)
      8 ![bstk100](https://i.imgur.com/TuQlxat.jpeg)
      9 ![bstk100](https://i.imgur.com/w0g6Qlz.jpeg)
     10 ![bstk100](https://i.imgur.com/ORgbBQh.jpeg)
     11 ![bstk100](https://i.imgur.com/1MDm3zt.png)
     12 
     13 * Keyboard Maintainer: [FREE WING GitHub](https://github.com/FREEWING-JP/qmk_firmware)
     14 * Hardware Supported: Pro Micro ATmega32U4 5V/16MHz
     15 * Hardware Availability: [BUFFALO USB 10-Key keyboard BSTK100BK](https://amzn.to/389GGtP), [Pro Micro ATmega32U4 5V/16MHz](https://amzn.to/3jePZPi)
     16 
     17 Make example for this keyboard (after setting up your build environment):
     18 
     19     make handwired/bstk100:default
     20 
     21 Enable VIA feature in QMK
     22 
     23     make handwired/bstk100:via
     24 
     25 Flashing example for this keyboard:
     26 
     27     make handwired/bstk100:default:flash
     28 
     29 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     30 
     31 ## Bootloader
     32 
     33 Enter the bootloader in one way:
     34 
     35 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead