qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1255B)

      1 # Cans12erV2
      2 ![Cans12erV2](https://i.imgur.com/3fkbydJ.png)
      3 
      4 New version of my 12-key orthogonal macro keypad with hot swappable keyswitch support and an encoder knob.
      5 
      6 * Keyboard Maintainer: [Can Baytok](https://github.com/canbaytok)
      7 * Build Instructions: [Github](https://github.com/canbaytok/Cans12erV2)
      8 * Hardware Supported: RP2040 Zero
      9 * Hardware Availability: amazon, aliexpress (RP2040 Zero clones work too)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make handwired/cans12erv2:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make handwired/cans12erv2:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     26 * **Physical reset button**: Quickly double press the reset button on the PCB to make the RP2040 boot into its uf2 mode
     27 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available