qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1898B)

      1 # Dactyl Lightcycle
      2 
      3 ![TopElev](https://i.imgur.com/MwPhTrCh.jpg)
      4 
      5 A handwired, split bodied, concave key-well, columnar keyboard.  
      6 The *Dactyl Lightcycle* is a variation of the [Dactyl](/keyboards/handwired/dactyl/) keyboard, its differences are:
      7 1. Top (number) row removed
      8 2. Five key thumb cluster; one less than the *Dactyl's* six
      9 
     10 This modernised rendition of the *Dactyl Lightcycle* requires two Pro Micro controllers, rather than the *Dactyl's* original implementation of a micro controller and I/O expander.
     11 
     12 * Keyboard Maintainer: [Matt Adereth](https://github.com/adereth/)
     13 * Hardware Supported: 2x Pro Micro micro controller, or clone of
     14 * Hardware Availability: Case files available on [GitHub](https://github.com/adereth/dactyl-keyboard), file names beginning "lightcycle" apply
     15 
     16 Make example for this keyboard (after setting up your build environment):
     17 
     18     make handwired/dactyl_lightcycle:default
     19 
     20 Flashing example for this keyboard:
     21 
     22     make handwired/dactyl_lightcycle:default:flash
     23 
     24 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     25 
     26 ## Bootloader
     27 
     28 Enter the bootloader in 3 ways:
     29 
     30 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     31 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     32 * **Keycode in keymap**: Press the key mapped to `QK_BOOT` if it is available
     33 
     34 ## QMK Layouts
     35 
     36 The following [community layouts](/layouts/) are supported:
     37 | Layout | Diagram |
     38 | :---: | :---: |
     39 | Split_3x6_3 | ![split_3x6_3](https://i.imgur.com/xBVDsqE.jpg) |
     40 | Split_3x5_3 | ![split_3x5_3](https://i.imgur.com/nc0dbH1.jpg) |