qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1451B)

      1 # Dactyl (Pro Micro)
      2 
      3 ![Dactyl](https://i.imgur.com/a7uY1eSh.png)
      4 
      5 A split body, concave shaped key well, columnar keyboard with a 6 key thumb cluster that takes inspiration from the Kinesis Advantage keyboard range. This rendition of the *Dactyl* requires two micro controllers rather than the [original implementation](/keyboards/handwired/dactyl/) of a micro controller and I/O expander.
      6 
      7 * Keyboard Maintainer: [Matt Adereth](https://github.com/adereth)
      8 * Hardware Supported: Pro Micro controller, or clones of
      9 * Hardware Availability: [GitHub](https://github.com/adereth/dactyl-keyboard)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make handwired/dactyl_promicro:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make handwired/dactyl_promicro:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Optional Hardware
     22 
     23 A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`.
     24 
     25 ## Bootloader
     26 
     27 Enter the bootloader in 2 ways:
     28 
     29 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     30 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available