readme.md (1500B)
1 # Dactyl Tracer 2 3  4 5 The Dactyl Tracer is a handwired, split bodied, concave key-well, columnar keyboard. Case design is similar to the [Dactyl CC](/keyboards/handwired/dactyl_cc) though overall design is closer to the [Dactyl ManuForm](/keyboards/handwired/dactyl_manuform/). The `Q` and `P` keys are vertically offset, from `A` and `;` keys respectively, to allow for easier actuation by third/ring finger. 6 7 * Keyboard Maintainer: [Michael Johns](https://github.com/mjohns) 8 * Hardware Supported: Pro Micro controller, or clone of 9 * Hardware Availability: [Case Files](https://github.com/mjohns/tracer) 10 11 Make example for this keyboard (after setting up your build environment): 12 13 make handwired/dactyl_tracer:default 14 15 Flashing example for this keyboard: 16 17 make handwired/dactyl_tracer:default:flash 18 19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 20 21 ## Bootloader 22 23 Enter the bootloader in 3 ways: 24 25 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 26 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead 27 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available