qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1316B)

      1 # DMOTE
      2 
      3 ![DMOTE](https://i.imgur.com/JYkB6LBh.jpg)
      4 
      5 The “**D**actyl-**M**anuForm: **O**pposable **T**humb **E**dition” is made from a Clojure
      6 application maintained [here](https://github.com/veikman/dactyl-keyboard).
      7 The application supports varied physical layouts and therefore matrices.
      8 This physical variability is its main feature; its QMK firmware is ordinary.
      9 
     10 * Keyboard Maintainer: [Viktor Eikman](https://github.com/veikman/)
     11 * Hardware Supported: Pro Micro and clones
     12 
     13 Make example for this keyboard (after setting up your build environment):
     14 
     15     make handwired/dmote:default
     16 
     17 Flashing example for this keyboard:
     18 
     19     make handwired/dmote:default:flash
     20 
     21 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     22 
     23 ## Bootloader
     24 
     25 Enter the bootloader in 3 ways:
     26 
     27 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     28 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     29 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available