readme.md (1106B)
1 # Elrgo S Split Keyboard 2 3 This is a fork of the VOID Ergo S with QMK Configurator support. 4 5 Elrgo S uses 2x Arduino Pro Micro (ATmega32U4) with 3D printed case. 6 7 [Building guide, models for 3D printing](https://github.com/Eloren1/Elrgo_S) 8 9 * Keyboard Maintainer: [Eloren](https://github.com/Eloren1) 10 * Hardware Supported: Arduino Pro Micro 11 * Hardware Availability: [Open Source](https://github.com/Eloren1/Elrgo_S) 12 13 Make example for this keyboard (after setting up your build environment): 14 15 make handwired/elrgo_s:default 16 17 Flashing example for this keyboard: 18 19 make handwired/elrgo_s:default:flash 20 21 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 22 23 ## Bootloader 24 25 Enter the bootloader in 2 ways: 26 27 * **Physical reset button**: Briefly press the button through the hole on the left side of the case. 28 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available