readme.md (1168B)
1 # handwired/jankrp2040dactyl 2 3 4 A budget Dactyl-Manuform build using Raspberry Pi Pico. 5 6 * Keyboard Maintainer: [Ethan Perry](https://github.com/wheres-perry) 7 * Hardware Supported: RP2040 Community Edition 8 * Hardware Availability: https://www.digikey.com/en/product-highlight/r/raspberry-pi/raspberry-pi-picoboard 9 10 Make example for this keyboard (after setting up your build environment): 11 12 make handwired/jankrp2040dactyl:default 13 14 Flashing example for this keyboard: 15 16 make handwired/jankrp2040dactyl:default:flash 17 18 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 19 20 ## Bootloader 21 22 Enter the bootloader in 3 ways: 23 24 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 25 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead 26 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available