qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1226B)

      1 # ergosplit44
      2 
      3 ![ergosplit44](https://i.imgur.com/RhRIe2ah.png)
      4 
      5 This is a handdwired split 44 key keyboard. the two sides are connectd via a custom 2x8P pin header cable.
      6 
      7 * Keyboard Maintainer: [Marek128b](https://github.com/Marek128b)
      8 * Hardware Supported: WaveShare RP2040-Zero
      9 * Hardware Availability: [Open Source](https://github.com/Marek128b/Split40)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make handwired/marek128b/ergosplit44:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make handwired/marek128b/ergosplit44:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down the top left key and plug in the keyboard.
     26 * **Physical reset button**: Hold down the `BOOT` button on the RP2040-Zero, then press the `RESET` button.
     27 * **Keycode in layout**: There is no key mapped to `QK_BOOT` in the pre-created keymaps, but you may assign this key in any keymaps you create.