qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1484B)

      1 # meck_tkl
      2 
      3 ![meck_tkl](https://i.imgur.com/eIpQTjQ.jpeg)
      4 
      5 A standard tenkeyless keyboard, using STM32 Blackpill.
      6 
      7 * Keyboard Maintainer: [Gabriel Kim](https://github.com/gabrielkim13)
      8 * Hardware Supported: Blackpill F401
      9 * Hardware Availability: [Thingiverse: Mechanical Keyboard - MECH - TKL](https://www.thingiverse.com/thing:4225961)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make handwired/meck_tkl:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make handwired/meck_tkl:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     26 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     27 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
     28 
     29 ## Wiring instructions
     30 
     31 - On Blackpill boards, **avoid** using the following pins, since they will cause either USB enumeration or the DFU bootloader to not work correctly:
     32   - **USB-related pins:** `PA10`, `PA11`, `PA12`
     33   - **BOOT1 pin:** `PB2`
     34 
     35 Sample wiring:
     36 
     37 ![wiring](https://i.imgur.com/jIDmsNy.jpg)