readme.md (1173B)
1 # NortonTechPad 2 3 4 5 The NortonTechPad is a numpad inspired by the SiCK-Pad,it is also 3D printed and designed to be inexpensive. 6 7 - Keyboard Maintainer: [NortonTech](https://github.com/NortonTech-Official) 8 - Hardware Supported: Pro Micro 9 10 11 Make example for this keyboard (after setting up your build environment): 12 13 make handwired/nortontechpad:default 14 15 Flashing example for this keyboard: 16 17 make handwired/nortontechpad:default:flash 18 19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 20 21 ## Bootloader 22 23 Enter the bootloader in 3 ways: 24 25 * **Bootmagic reset**: Hold down the top left key and plug in the keyboard. This will also clear EEPROM, so it is a good first step if the keyboard is misbehaving. 26 * **Physical reset button**: Short the GND and RST pins on the Pro Micro with something conductive. 27 * **Keycode in layout**: There is no key mapped to `QK_BOOT` in the pre-created keymaps, but you may assign this key in any keymaps you create.