qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1327B)

      1 # phantagom/varan
      2 
      3 [Varan](https://en.wikipedia.org/wiki/Varan) is a fictional monster, or kaiju, which first appeared in the 1958 film Varan the Unbelievable
      4 
      5 ![phantagom/varan](https://i.imgur.com/EuGAMyeh.jpeg)
      6 ![phantagom/varan](https://i.imgur.com/zO2ju9Ah.jpeg)
      7 
      8 A numpad with RGB strip based on a RP2040 controller.
      9 
     10 * Keyboard Maintainer: [Dennis Kruyt](https://github.com/dkruyt)
     11 * Project page: [varan](https://github.com/dkruyt/mk/tree/main/varan)
     12 * Hardware Supported: *RP2040-Zero*
     13 
     14 Make example for this keyboard (after setting up your build environment):
     15 
     16     make phantagom/varan:default
     17 
     18 Flashing example for this keyboard:
     19 
     20     make phantagom/varan:default:flash
     21 
     22 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     23 
     24 ## Bootloader
     25 
     26 Enter the bootloader in 3 ways:
     27 
     28 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     29 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     30 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available