qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1123B)

      1 # Cherry Protype Display Typewriter
      2 
      3 ![handwired/protype](https://i.imgur.com/hcFikid.jpeg)
      4 
      5 Handwired RP2040 Pro Micro (Community Edition) on Cherry Protype Display Typewriter PCB.
      6 
      7 * Keyboard Maintainer: [nooges](https://github.com/nooges)
      8 * Hardware Supported: RP2040 Pro Micro Controller
      9 
     10 Make example for this keyboard (after setting up your build environment):
     11 
     12     qmk compile -kb handwired/protype -km default
     13 
     14 Flashing example for this keyboard:
     15 
     16     qmk flash -kb handwired/protype -km default
     17 
     18 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     19 
     20 ## Bootloader
     21 
     22 Enter the bootloader in 3 ways:
     23 
     24 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     25 * **Physical reset button**: Hold the Boot button on the microcontroller and then press Reset
     26 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available