qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1260B)

      1 # Scotto37
      2 
      3 ![Scotto37](https://i.imgur.com/WOXAGc3h.jpg)
      4 
      5 A 37-key gasket-mounted 0.25u column-staggered keyboard with a 3u spacebar.
      6 
      7 *   Keyboard Maintainer: [Joe Scotto](https://github.com/joe-scotto)
      8 *   Hardware Supported: RP2040 Pro Micro
      9 *   Hardware Availability: [ScottoKeebs](https://scottokeebs.com), [Amazon](https://amazon.com), [AliExpress](https://aliexpress.com)
     10 
     11 # Compiling
     12 
     13 Make example for this keyboard (after setting up your build environment):
     14 
     15     make handwired/scottokeebs/scotto37:default
     16 
     17 Flashing example for this keyboard:
     18 
     19     make handwired/scottokeebs/scotto37:default:flash
     20 
     21 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     22 
     23 # Bootloader
     24 
     25 Enter the bootloader in 3 ways:
     26 
     27 *   **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     28 *   **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     29 *   **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available