qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1245B)

      1 # ScottoKatana
      2 
      3 ![ScottoKatana](https://i.imgur.com/pgXehiIh.jpeg)
      4 
      5 A 33-key katana staggered keyboard with a 6.25u spacebar and two 1.5u function keys. Case files available [here](https://github.com/joe-scotto/scottokeebs).
      6 
      7 * Keyboard Maintainer: [Joe Scotto](https://github.com/joe-scotto)
      8 * Hardware Supported: RP2040
      9 * Hardware Availability: [Amazon](https://amazon.com)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make handwired/scottokeebs/scottokatana:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make handwired/scottokeebs/scottokatana:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     26 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     27 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available