qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1138B)

      1 # TechnicPad
      2 
      3 ![TechnicPad](https://i.imgur.com/LPD0KSL.jpg)
      4 
      5 A 4% (2x2) macropad, that is compatible to technic building blocks. 
      6 
      7 * Keyboard Maintainer: [Niclas Hirschfeld](https://github.com/nwhirschfeld)
      8 * Hardware Supported: Pro Micro boards
      9 * Hardware Availability: for now TechnicPad is handwired and uses an Arduino pro micro. [TechnicPad repository](https://github.com/nwhirschfeld/TechnicPad) 
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make handwired/technicpad:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make handwired/technicpad:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down the upper left key and plug in the keyboard
     26 * **Physical reset**: Short the _RST_ and _GND_ pins of the PCB
     27 * **Keycode in layout**: Press the key mapped to QK_BOOT if it is available