readme.md (1933B)
1 # tkk 2 3  4 5 This is 'tkk', a ten key split keyboard wired as a single "row," ten "column" diode-less numpad. I've been dreaming of my own ten key layout since before discovering [ASETIOP](https://asetniop.com/), and [gboard's Ginny](https://www.gboards.ca/) ... but I'm too new to QMK and too rusty with C to figure out how to modify the Ginny's layout / chording engine. So here we are. The tkk [layout](https://imgur.com/a/eQzhSgw) is built around a vaguely DVORAK-ish letter layout (with some adjustments meant to aid memorization), with "modules" for numbers, movement, modifiers, and even mouse keys. 6 7 * Keyboard Maintainer: [Joe Fass](https://github.com/jfass) 8 * Hardware Supported: hand-wired, ten switch diode-less keyboard, using a Teensy 2.0 9 * Hardware Availability: (forget where I bought the parts, but easy to find) 10 11 Make example for this keyboard (after setting up your build environment): 12 13 make handwired/tkk:default 14 15 Or: 16 17 qmk compile -kb handwired/tkk -km default 18 19 In my build environment (Ubuntu), I needed to unset quite a few environment variables like CONDA\_BACKUP\_LDFLAGS that contained hardware options qmk didn't like, before this succeeded. 20 21 Flashing example for this keyboard: 22 23 make handwired/tkk:default:flash 24 25 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 26 27 ## Bootloader 28 29 Enter the bootloader in 3 ways: 30 31 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 32 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead 33 * **Keycode in layout**: Press the key mapped to `RESET` if it is available 34