config.h (3266B)
1 /* 2 Copyright 2012 Jun Wako <wakojun@gmail.com> 3 Copyright 2015 Jack Humbert 4 5 This program is free software: you can redistribute it and/or modify 6 it under the terms of the GNU General Public License as published by 7 the Free Software Foundation, either version 2 of the License, or 8 (at your option) any later version. 9 10 This program is distributed in the hope that it will be useful, 11 but WITHOUT ANY WARRANTY; without even the implied warranty of 12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 GNU General Public License for more details. 14 15 You should have received a copy of the GNU General Public License 16 along with this program. If not, see <http://www.gnu.org/licenses/>. 17 */ 18 19 #pragma once 20 21 // #define USB_VBUS_PIN B10 22 23 // WS2812 RGB LED strip input and number of LEDs 24 #define WS2812_PWM_DRIVER PWMD3 // default: PWMD2 25 #define WS2812_PWM_CHANNEL 1 // default: 2 26 #define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 27 //#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy). 28 // #define WS2812_PWM_DMA_STREAM STM32_DMA1_STREAM3 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. 29 #define WS2812_PWM_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. 30 31 #define DEBUG_LED_PIN C13 32 33 /* Audio config */ 34 #define AUDIO_PIN A5 35 #define AUDIO_PIN_ALT A4 36 #define AUDIO_PIN_ALT_AS_NEGATIVE 37 38 /* serial.c configuration for split keyboard */ 39 #define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode. 40 #define SERIAL_USART_TX_PIN A9 41 #define SERIAL_USART_RX_PIN A10 42 #define SERIAL_USART_DRIVER SD1 43 #define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 44 #define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 45 #define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100 46 47 /* i2c config for oleds */ 48 #define I2C_DRIVER I2CD1 49 #define I2C1_SCL_PIN B6 50 #define I2C1_SDA_PIN B7 51 #define I2C1_SCL_PAL_MODE 4 52 #define I2C1_SDA_PAL_MODE 4 53 #define I2C1_CLOCK_SPEED 400000 54 55 /* spi config for eeprom and pmw3360 sensor */ 56 #define SPI_DRIVER SPID2 57 #define SPI_SCK_PIN B13 58 #define SPI_SCK_PAL_MODE 5 59 #define SPI_MOSI_PIN B15 60 #define SPI_MOSI_PAL_MODE 5 61 #define SPI_MISO_PIN B14 62 #define SPI_MISO_PAL_MODE 5 63 64 /* eeprom config */ 65 #define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN B8 66 #define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8 67 // #define EXTERNAL_EEPROM_BYTE_COUNT 8196 68 // #define EXTERNAL_EEPROM_PAGE_SIZE 32 69 // #define EXTERNAL_EEPROM_ADDRESS_SIZE 2 70 // #define DEBUG_EEPROM_OUTPUT 71 72 /* pmw3360 config */ 73 #define PMW33XX_CS_PIN B9 74 #define PMW33XX_SPI_DIVISOR 8