qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1280B)


      1 # Uthol
      2 
      3 ![Uthol](https://i.imgur.com/weFwdhfh.jpeg)
      4 
      5 A handwired 50% (12x5) ortholinear keyboard made by Uthol
      6 
      7 * Keyboard Maintainer: [Uthol](https://github.com/Uthol)
      8 * Hardware Supported: Pro Micro ATMega32u4, Blackpill STM32F4x1 
      9 * Hardware Availability: [Pro Micro](https://www.sparkfun.com/products/12640), [Blackpill STM32F4x1 ](https://www.aliexpress.com/item/1005001456186625.html)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make handwired/uthol/rev2:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make handwired/uthol/rev2:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key) and plug in the keyboard
     26 * **Physical reset button**: On the Pro Micro, short the `GND` and `RST` pins. On the Blackpill, press `BOOT0` key and the `RST` key, then release the `RST` key, and release the `BOOT0` key 
     27 * **Keycode in layout**: Press the key mapped to `Settings + Backspace`