qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1113B)

      1 # kepler
      2 
      3 ![kepler](https://i.imgur.com/UD1J92Eh.jpeg)
      4 
      5 Second model of the Argentinian based keyboard manufacturer WWA
      6 
      7 * Keyboard Maintainer: [spacehangover](https://github.com/spacehangover)
      8 * Hardware Supported: RP2040 Handwired
      9 * Hardware Availability: RP2040 Pico
     10 
     11 
     12 Make example for this keyboard (after setting up your build environment):
     13 
     14     make handwired/wwa/kepler:default
     15 
     16 Flashing example for this keyboard:
     17 
     18     make handwired/wwa/kepler:default:flash
     19 
     20 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     21 
     22 ## Bootloader
     23 
     24 Enter the bootloader in 3 ways:
     25 
     26 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     27 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     28 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available