qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1402B)

      1 # ZeroPad
      2 
      3 ![ZeroPad](https://i.imgur.com/KBkI4q1.jpeg)
      4 
      5 This keyboard is inspired by the scotto9 from Joe Scotto. This keyboard is compatible with via and has 4 layers of keybinds (24 keybinds - 4x8 + 1 per layer for changing the layer).
      6 
      7 * Keyboard Maintainer: [Leon Sieber](https://github.com/diffrentGuesser)
      8 * Hardware Supported: Pro Micro, 3 pin switches
      9 * Hardware Availability: [Pro Micro](https://de.aliexpress.com/item/32846843498.html?spm=a2g0o.cart.0.0.146d4ae4kCjqDY&mp=1&gatewayAdapt=glo2deu), [switches](https://de.aliexpress.com/item/1005007135709029.html?spm=a2g0o.cart.0.0.146d4ae4kCjqDY&mp=1&gatewayAdapt=glo2deu)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make handwired/zeropad:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make handwired/zeropad:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key) and plug in the keyboard 
     26 * **Physical reset**: Short the GND and the RST pins on the Pro Micro.
     27 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available