readme.md (1388B)
1 # Hardware Abstraction Handwire 2 3  4 5 A hotswap 60% keyboard with an arrow key cluster. Board features support for an OLED screen, push pull solenoid, and an active buzzer. 6 7 * Keyboard Maintainer: [Andy Tsai](https://github.com/cgmandy) 8 * Hardware Supported: ATMEGA32U4, Push-Pull Solenoid, Active Buzzer, SSD1306 128x32 OLED 9 * Hardware Availability: https://hardwareabstraction.com 10 11 Make example for this keyboard (after setting up your build environment): 12 13 make hardwareabstraction/handwire:default 14 15 Flashing example for this keyboard: 16 17 make hardwareabstraction/handwire:default:flash 18 19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 20 21 ## Bootloader 22 23 Enter the bootloader in 3 ways: 24 25 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 26 * **Physical reset button**: Briefly press the button on the top left side of the PCB. You can alternatively short the two pads vertically with a pair of tweezers. 27 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. This can be configured in VIA or on the QMK configurator.