qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1732B)

      1 # Haverworks Theseus75
      2 
      3 ![Theseus75 v1 PCB](https://imgur.com/N81LsCO.png)
      4 
      5 The Theseus75 is a 75% row-staggered split keyboard with a macro column and rotary encoders on both sides. Each half features a dual-role USB-C port and integrated USB hub, allowing the unused port to act as a USB-C 2.0 High-Speed host for connecting a numpad, mouse, flash drive, security key, mobile phone, or similar device.
      6 
      7 > [!NOTE]
      8 > Up to 5V at 1.5A can be supplied, depending on negotiations with the host.
      9 
     10 * Keyboard Maintainers: [Moritz Plattner](https://github.com/ebastler), [Alex Havermale](https://github.com/haversnail)
     11 * Hardware Supported: Haverworks Theseus75 v1 PCBs (hot-swap and solder)
     12 * Hardware Availability: [Group buy](https://haver.works/theseus75)
     13 
     14 Make example for this keyboard (after setting up your build environment):
     15 
     16     make haverworks/theseus75:default
     17 
     18 Flashing example for this keyboard:
     19 
     20     make haverworks/theseus75:default:flash
     21 
     22 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     23 
     24 ## Bootloader
     25 
     26 Enter the bootloader in two ways:
     27 
     28 * **Physical reset button**: Hold the <kbd>Reset</kbd>/<kbd>Flash</kbd> button on the back of the PCB for approximately one second (instructions are also included on the PCB)
     29 * **Bootmagic reset**:
     30     * **Left half**: Hold down the first key to the right of the encoder (<kbd>Esc</kbd> by default) and plug in the keyboard
     31     * **Right half**: Hold down the first key to the left of the encoder (<kbd>Print Screen</kbd> by default) and plug in the keyboard