qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1090B)

      1 # h101
      2 
      3 ![h101](https://i.imgur.com/LqmvjS1h.png)
      4 
      5 F13 full-size PCB with 1.25u function row Spacing.
      6 
      7 * Keyboard Maintainer: [hineybush](https://github.com/hineybush)
      8 * Hardware Supported: h101 using STM32F072
      9 * Hardware Availability: Fossil by Carolina Mech
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make hineybush/h101:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make hineybush/h101:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     26 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     27 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available