readme.md (1568B)
1 # modelm101_teensy2 2 3  4 5 This is based on the modelm101 teensypp keyboard by iw0rm3r. The difference is that Teensy 2.0 board (produced by PJRC) is used instead of the Teensy++ 2.0 due to the availability issues. Only CapsLock LED is supported since Teensy 2.0 only has 25 digital I/0 pins. 6 7 Configuration is build for the Atmel ATmega32U4 controller, which you can easily use on the Teensy 2.0 board (produced by PJRC). 8 9 Pins of the Teensy board you should use by default: 10 ``` 11 Columns: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 12 Pins: F0 F1 F4 F5 F6 F7 B6 B5 B4 D7 D6 B0 B1 B2 B3 B7 13 -------------------------------------------------------- 14 Rows: 1 2 3 4 5 6 7 8 15 Pins: D0 D1 D2 D3 C6 C7 D5 D4 16 -------------------------------------------------------- 17 Status LEDs: CapsLock +5V ScrollLock NumLock 18 Pins: E6 5V - - 19 ``` 20 21 Keyboard Maintainer: [wangfuco](https://github.com/wangfuco) 22 Hardware Supported: Teensy 2.0 board by PJRC 23 Hardware Availability: https://www.pjrc.com/store/teensy.html 24 25 Make example for this keyboard (after setting up your build environment): 26 27 make ibm/model_m/teensy2:default:teensy 28 29 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).