readme.md (1668B)
1 # m122-3270 2 3  4 5 This is a replacement controller for the IBM Model M 122 key terminal keyboard 6 running on a STM32F411 BlackPill, intended to act as closely to the 3270 7 keyboard's functioning as possible while still being usable on a PC. 8 9 * Keyboard Maintainer: [Jay Maynard](https://github.com/jmaynard) 10 * Hardware Supported: BlackPill STM32F411, Teensy++ 2.0 11 * Hardware Availability: [BlackPill](https://www.adafruit.com/product/4877), [Teensy](https://www.pjrc.com/store/teensypp.html) 12 13 Make example for this keyboard (after setting up your build environment): 14 15 make ibm/model_m_122/m122_3270/blackpill:default 16 make ibm/model_m_122/m122_3270/bluepill:default 17 make ibm/model_m_122/m122_3270/teensy:default 18 19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) 20 and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) 21 for more information. Brand new to QMK? Start with our 22 [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 23 24 A schematic and Gerber files are publicly available for those wishing to have 25 carrier boards made professionally instead of handwiring things. The M122 26 matrix connectors plug right into it. It can be found at 27 https://github.com/jmaynard/tronguylabs-m122-blackpill. 28 29 This is derived from Luke Stanley's handwired/ibm122m keyboard, with my own 30 keymapping and rework of the I/O for the BlackPill. There's also a version for 31 the Teensy++ 2.0, since that was my original design and I still use one on one 32 board, even though I switched to the BlackPill for future-proofing. 33 The Teensy++ 2.0 is not recommended for new designs.