qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1245B)

      1 # Span
      2 
      3 *Span is a 3x5+3 split keyboard, with 2u, 1.5u, 1u thumb clusters.*
      4 
      5 The keyboard layout Span uses is derived from GergoPlex, a keyboard that was originally available on gboards.ca
      6 (now defunct).
      7 
      8 * Keyboard Maintainer: [@idank](https://github.com/idank)
      9 * Hardware Supported: [spankbd](https://github.com/idank/spankbd)
     10 * Hardware Availability: *[holykeebs](https://holykeebs.com)*
     11 
     12 Make example for this keyboard (after setting up your build environment):
     13 
     14     make idank/spankbd:default
     15 
     16 Flashing example for this keyboard:
     17 
     18     make idank/spankbd:default:flash
     19 
     20 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     21 
     22 ## Bootloader
     23 
     24 Enter the bootloader in 3 ways:
     25 
     26 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard.
     27 * **Physical reset button**: Briefly press the button on the front of the PCB. Double tap for pro micro, 1 second press for Sea Picro / RP2040s.
     28 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available.