qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1513B)

      1 # Janus
      2 
      3 ![Janus](https://i.imgur.com/7Lzhafeh.jpg)
      4 
      5 A 34-key split ortholinear keyboard, powered by two Seeed XIAO RP2040.
      6 
      7 * Keyboard Maintainer: [Steven Karrmann](https://github.com/skarrmann)
      8 * Hardware Supported: Janus PCBs, Seeed XIAO RP2040
      9 * Hardware Availability: [Janus GitHub repository](https://github.com/skarrmann/janus)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make janus:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make janus:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 If you would like to plug in your keyboard using either half, then set the EEPROM left/right UF2 bootloader parameter when flashing each half for the first time. Refer to [QMK's handedness by EEPROM documentation](https://docs.qmk.fm/features/split_keyboard#handedness-by-eeprom). Without this bootloader parameter, the configuration assumes the left half will be plugged in.
     22 
     23 ## Bootloader
     24 
     25 Enter the bootloader in 3 ways:
     26 
     27 * **Bootmagic reset**: Hold down the top left key on the left half, or top right key on the right half, and then plug in the USB cable on that keyboard half.
     28 * **Physical reset button**: Double tap the reset button on the XIAO RP2040.
     29 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available.