qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1252B)

      1 # Hub20
      2 
      3 Hub20 is a 20 key macro pad with an inbuilt USB 2.0 hub and dual rotary encoders. It can be configured to be a left / right hand numberpad, along with a 4x5 1u layout.
      4 
      5 For more information regarding the keyboard, please visit the [Hub20 Website](https://www.joshajohnson.com/hub20) or [GitHub Repo](https://github.com/joshajohnson/Hub20).
      6 
      7 * Keyboard Maintainer: [Josh Johnson](https://github.com/joshajohnson)
      8 * Hardware Supported: Hub20 PCB (STM32F072)
      9 * Hardware Availability: [Josh Johnson](https://www.joshajohnson.com/hub20)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make joshajohnson/hub20:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make joshajohnson/hub20:default:flash
     18 
     19 To reset the board into bootloader mode, do one of the following:
     20 
     21 * Press the reset switch between the center two USB-C ports while the board is plugged in
     22 * Hold the top left key while connecting the USB cable (also erases persistent settings)
     23 
     24 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).