qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1288B)


      1 # KBIC65
      2 
      3 ![KBIC65 top-down view](https://github.com/b-karl/KBIC65/blob/main/img/photoshoot/full_keyboard_straight_above.jpg)
      4 
      5 A 65%/70 key FR4-stack open-source keyboard with some design optimizations for wireless. For more info visit the [KBIC65 website](https://karlb.eu/kbic65/) or the [GitHub repo](https://github.com/b-karl/KBIC65).
      6 
      7 * Keyboard Maintainer: [Karl Berggren](https://github.com/b-karl)
      8 * Hardware Supported: [KBIC65](https://github.com/b-karl/KBIC65)
      9 * Hardware Availability: Open-source design [available on GitHub](https://github.com/b-karl/KBIC65)
     10 
     11 Firmware and default keymap have been tested using a KBIC65 with an Elite-C rev 4 controller.
     12 
     13 ## Build firmware
     14 
     15 Make example for this keyboard (after setting up your build environment):
     16 
     17 ```bash
     18  qmk compile -kb karlb/kbic65 -km default
     19 ```
     20 
     21 See the [QMK setup documentation](https://docs.qmk.fm/#/newbs_getting_started) to set up the QMK tools. I recommend flashing using
     22 
     23 ```bash
     24  qmk flash -kb karlb/kbic65 -km default
     25 ```
     26 
     27 ## Bootloader
     28 
     29 Since the keyboard is designed to have an exposed ProMicro the bootloader can always be entered by short circuiting the `RST` and `GND` pins on the ProMicro. If the keyboard is configured with the default keymap, the bootloader can be entered by pressing `R_GUI/FN + B`
     30 
     31