readme.md (1051B)
1 # Nyquistpad 2 3 A 5x6 macropad keyboard based off of a prototype Nyquist PCB. 4 5 * Keyboard Maintainer: Keebio 6 * Hardware Supported: Nyquistpad PCB 7 * Hardware Availability: [Keebio](https://keeb.io/) 8 9 Make example for this keyboard (after setting up your build environment): 10 11 make keebio/nyquistpad:default 12 13 Flashing example for this keyboard: 14 15 make keebio/nyquistpad:default:flash 16 17 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 18 19 ## Bootloader 20 21 Enter the bootloader in 3 ways: 22 23 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 24 * **Physical reset button**: Press and hold the button on the back of the PCB for at least 2 seconds and let go, or double-press the button 25 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available