qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1084B)

      1 # Keychron C3 Pro
      2 
      3 ![Keychron C3 Pro](https://i.imgur.com/b4FTJsf.jpg)
      4 
      5 A customizable 87% keyboard.
      6 
      7 * Keyboard Maintainer: [Keychron](https://github.com/keychron)
      8 * Hardware Supported: Keychron C3 Pro
      9 * Hardware Availability: [Keychron](https://www.keychron.com/)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make keychron/c3_pro/ansi/red:default
     14     make keychron/c3_pro/ansi/rgb:default 
     15 
     16 Flashing example for this keyboard:
     17 
     18     make keychron/c3_pro/ansi/red:default:flash
     19     make keychron/c3_pro/ansi/rgb:default:flash
     20 
     21 ## bootloader
     22 
     23 Enter the bootloader in two ways:
     24 
     25 * **Bootmagic reset**: Hold down the key located at *K00*, commonly programmed as *Esc* while plugging in the keyboard.
     26 * **Physical reset button**: Briefly press the RESET button under the spacebar.
     27 
     28 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).