config.h (1337B)
1 /* Copyright 2023 @ Keychron(https://www.keychron.com) 2 * 3 * This program is free software: you can redistribute it and/or modify 4 * it under the terms of the GNU General Public License as published by 5 * the Free Software Foundation, either version 2 of the License, or 6 * (at your option) any later version. 7 * 8 * This program is distributed in the hope that it will be useful, 9 * but WITHOUT ANY WARRANTY; without even the implied warranty of 10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 11 * GNU General Public License for more details. 12 * 13 * You should have received a copy of the GNU General Public License 14 * along with this program. If not, see <http://www.gnu.org/licenses/>. 15 */ 16 17 #pragma once 18 19 /* RGB Matrix Driver Configuration */ 20 #define SNLED27351_I2C_ADDRESS_1 SNLED27351_I2C_ADDRESS_GND 21 22 /* Increase I2C speed to 1000 KHz */ 23 #define I2C1_TIMINGR_PRESC 0U 24 #define I2C1_TIMINGR_SCLDEL 3U 25 #define I2C1_TIMINGR_SDADEL 0U 26 #define I2C1_TIMINGR_SCLH 15U 27 #define I2C1_TIMINGR_SCLL 51U 28 29 #define SNLED27351_CURRENT_TUNE \ 30 { 0x80, 0xFF, 0xFF, 0x80, 0xFF, 0xFF, 0x80, 0xFF, 0xFF, 0x80, 0xFF, 0xFF } // 300mA 31 32 /* Encoder Configuration */ 33 #define ENCODER_DEFAULT_POS 0x3 34 35 // Needed as the master side could enter slave state during poweron 36 // of host, due to missing VUSB detection. 37 #define SPLIT_WATCHDOG_ENABLE