config.h (1449B)
1 /* Copyright 2021 @ Keychron (https://www.keychron.com) 2 * 3 * This program is free software: you can redistribute it and/or modify 4 * it under the terms of the GNU General Public License as published by 5 * the Free Software Foundation, either version 2 of the License, or 6 * (at your option) any later version. 7 * 8 * This program is distributed in the hope that it will be useful, 9 * but WITHOUT ANY WARRANTY; without even the implied warranty of 10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 11 * GNU General Public License for more details. 12 * 13 * You should have received a copy of the GNU General Public License 14 * along with this program. If not, see <http://www.gnu.org/licenses/>. 15 */ 16 17 #pragma once 18 19 /* If PH3 used with a stronger pull resistor then the following definition needs be included */ 20 // #define MATRIX_UNSELECT_DRIVE_HIGH 21 22 /* RGB Matrix Driver Configuration */ 23 #define SNLED27351_I2C_ADDRESS_1 SNLED27351_I2C_ADDRESS_VDDIO 24 #define SNLED27351_I2C_ADDRESS_2 SNLED27351_I2C_ADDRESS_GND 25 26 /* Increase I2C speed to 1000 KHz */ 27 #define I2C1_TIMINGR_PRESC 0U 28 #define I2C1_TIMINGR_SCLDEL 3U 29 #define I2C1_TIMINGR_SDADEL 0U 30 #define I2C1_TIMINGR_SCLH 15U 31 #define I2C1_TIMINGR_SCLL 51U 32 33 #define SNLED27351_PHASE_CHANNEL SNLED27351_SCAN_PHASE_9_CHANNEL 34 #define SNLED27351_CURRENT_TUNE \ 35 { 0xC4, 0xC4, 0x60, 0xC4, 0xC4, 0x60, 0xC4, 0xC4, 0x60, 0xC4, 0xC4, 0x60 } 36 37 /* Encoder Configuration */ 38 #define ENCODER_DEFAULT_POS 0x3