readme.md (1059B)
1 # Keygem KG60 ANSI 2 3 The following is the QMK Firmware for the Keygem KG60 ANSI PCB, a universal tray mount 60% hotswap PCB with per key RGB LED's. 4 5 The PCB will feature: 6 * Kailh Hotswap sockets 7 * QMK & VIA compatibility 8 * Per-Key RGB LED's 9 10 11 * Keyboard Maintainer: Keygem 12 * Hardware Supported: KG60 ANSI 13 14 Make example for this keyboard (after setting up your build environment): 15 16 make keygem/kg60ansi:default 17 18 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 19 20 ## Bootloader 21 22 Enter the bootloader in 3 ways: 23 24 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 25 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead 26 * **Keycode in layout**: Press the key mapped to `RESET` if it is available