qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1055B)

      1 # Keyspensory KP60
      2 
      3 ![Keyspensory KP60 PCB](https://i.imgur.com/3Ob0bp9h.png)
      4 
      5 * Keyboard Maintainer: [Freather](https://github.com/CMMS-Freather), [d-floe](https://github.com/d-floe)
      6 * Hardware Supported: PCB, Atmega32u4
      7 
      8 Make example for this keyboard (after setting up your build environment):
      9 
     10     make keyspensory/kp60:default
     11 
     12 Flashing example for this keyboard:
     13 
     14     make keyspensory/kp60:default:flash
     15 
     16 
     17 ## Bootloader
     18 Enter the bootloader in 3 ways:
     19 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     20 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     21 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
     22 
     23 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).