qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1370B)

      1 # keyten kt60-MU
      2 
      3 PCB supporting multiple 60% keyboards.
      4 Outline is compatible with:
      5 
      6 * All common O-Ring mount keyboards
      7 * Polaris V2 (In theory. At the time of PCB design, this keyboard is in IC stage)
      8 
      9 Supports two Type-C connector position:
     10 
     11 * Standard left position
     12 * Central position like Aksara 60
     13 
     14 Supports three JST connector position like the following PCBs or keyboards:
     15 
     16 * hiney h60
     17 * Singa Unikorn
     18 * Polaris V2
     19 
     20 ![kt60-MU](https://i.imgur.com/72uSWLx.jpg)
     21 
     22 * Keyboard Maintainer: [keyten](https://github.com/key10iq)
     23 * Hardware Supported: keyten kt60-MU
     24 * Hardware Availability: private GB
     25 
     26 Make example for this keyboard (after setting up your build environment):
     27 
     28     make keyten/kt60_mu:default
     29 	
     30 Flashing example for this keyboard:
     31 
     32     make keyten/kt60_mu:default:flash
     33 
     34 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     35 
     36 ## Bootloader 
     37 
     38 Enter the bootloader in 3 ways:
     39 
     40 * Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     41 * Keycode in layout: Press the key mapped to `QK_BOOT` if it is available
     42 * Physical reset button: Hold the button on the back of the PCB