qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1094B)

      1 # keyten kt60HS-T V1
      2 
      3 60% MX Hot-Swap Tsangan PCB
      4 
      5 ![kt60HS-T image](https://i.imgur.com/tOej7ND.jpeg)
      6 
      7 **Note: This firmware only supports the PCB version with STM32F401 controller**
      8 
      9 * Keyboard Maintainer: [keyten](https://github.com/key10iq)
     10 * Hardware Supported: keyten kt60HS-T
     11 * Hardware Availability: private GB
     12 
     13 Make example for this keyboard (after setting up your build environment):
     14 
     15     make keyten/kt60hs_t/v1:default
     16 	
     17 Flashing example for this keyboard:
     18 
     19     make keyten/kt60hs_t/v1:default:flash
     20 
     21 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     22 
     23 ## Bootloader 
     24 
     25 Enter the bootloader in 3 ways:
     26 
     27 * Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     28 * Keycode in layout: Press the key mapped to `QK_BOOT` if it is available
     29 * Physical reset button: Hold the button on the back of the PCB