qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1085B)

      1 # keyten x La-Versa Ortho Slayer
      2 
      3 Ortho Slayer is a full size FRL ortho keyboard inspired by Berserk
      4 
      5 ![Ortho Slayer image](https://i.imgur.com/CGYysPM.jpeg)
      6 
      7 * Keyboard Maintainer: [keyten](https://github.com/key10iq)
      8 * Hardware Supported: keyten x La-Versa Ortho Slayer
      9 * Hardware Availability: private GB
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make keyten/ortho_slayer:default
     14 	
     15 Flashing example for this keyboard:
     16 
     17     make keyten/ortho_slayer:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader 
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     26 * Keycode in layout: Press the key mapped to `QK_BOOT` if it is available
     27 * Physical reset button: Hold the button on the back of the PCB