qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1214B)

      1 # Madeline
      2 
      3 ![Madeline](https://i.imgur.com/MBT5kg2h.jpg)
      4 
      5 *A cool QAZ-Alice hybrid designed based on the Adalyn by [Marv](https://github.com/MarvFPV/Adalyn) with a PCB by [Rossman360](https://github.com/Rossman360)*
      6 * Keyboard Maintainer: [NCKiser](https://github.com/NCKiser)
      7 * Hardware Supported: Madeline PCB, rp2040
      8 * Hardware Availability: kb.rubybuilds.com
      9 
     10 Make example for this keyboard (after setting up your build environment):
     11 
     12     make kiserdesigns/madeline:default
     13 
     14 Flashing example for this keyboard:
     15 
     16     make kiserdesigns/madeline:default:flash
     17     
     18 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     19 ## Bootloader
     20 Enter the bootloader in 3 ways:
     21 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     22 * **Physical reset button**: Briefly double-tap the button on the back of the PCB - some may have pads you must short instead
     23 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available