qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1305B)


      1 # BM980HSRGB
      2 
      3 ![BM980HSRGB](https://i.imgur.com/k4NQGLxh.jpeg)
      4 
      5 A 1800, hotswap, in switch RGB keyboard from KPRepublic.
      6 
      7 * Keyboard Maintainer: [peepeetee](https://github.com/peepeetee)
      8 * Hardware Supported: BM980HSRGB
      9 * Hardware Availability:
     10   * https://kprepublic.com/products/bm980rgb-bm980-rgb-hot-swappable-custom-mechanical-keyboard-pcb-programmed-qmk-via-firmware-full-rgb-switch-underglow-type-c
     11   * https://www.aliexpress.com/item/1005002509519466.html
     12   * https://item.taobao.com/item.htm?id=645862298692
     13 
     14 Make example for this keyboard (after setting up your build environment):
     15 
     16     make kprepublic/bm980hsrgb:default
     17 
     18 Flashing example for this keyboard:
     19 
     20     make kprepublic/bm980hsrgb:default:flash
     21 
     22 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     23 
     24 ## Bootloader
     25 
     26 Enter the bootloader in one of 3 ways:
     27 
     28 * Short the two-pad footprint beneath the f12 key while the board is plugged in
     29 * Press the switch labled RST on the back of the PCB, near the MCU, while the board is plugged in
     30 * Hold the Esc key while connecting the USB cable (also erases persistent settings)