readme.md (1477B)
1 # Krado66 2 3  4 5 The Krado66 is a 65%ish ortholinear keyboard the uses standard 65% layout keycaps. It can also be configured to accept standard ANSI keycaps (Full 2.75u Right Shift and 1.25u bottom modifiers.) 6 7 For those that are wondering, "Krado" means "grid" in Esperanto. The board has 66 keys in its default layout. 8 9 * Keyboard Maintainer: [Feags](https://github.com/Feags) / [Krado Industries](https://kradoindustries.com/) 10 * Hardware Supported: Only Krado66 acrylic case and skeleton cases are supported. 11 * Hardware Availabilitiy: [Krado Industries](https://kradoindustries.com/) 12 13 Make example for this keyboard (after setting up your build environment): 14 15 make kradoindustries/krado66:default 16 17 Flashing example for this keyboard: 18 19 make kradoindustries/krado66:default:flash 20 21 22 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 23 24 ## Bootloader 25 26 Enter the bootloader in 3 ways: 27 28 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 29 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead 30 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available