readme.md (2138B)
1 # Promenade RP24S 2 3  4 5 The Promenade RP24S is the solder version of the [Promenade](https://github.com/qmk/qmk_firmware/tree/master/keyboards/kradoindustries/promenade) pcb which is based on the [Boardwalk](https://github.com/qmk/qmk_firmware/tree/master/keyboards/boardwalk), a 60% ortholinear keyboard that uses 1.5u Ergodoxian modifier keys. The original Boardwalk's split hand and 65% layouts are supported, and a new 50% extended layout similar to [RGBKB's Pan](https://github.com/qmk/qmk_firmware/tree/master/keyboards/rgbkb/pan) with two right-side macro columns was also added. In addition to Pok3r-style 60% tray mounting points, the pcb also has edge cuts for use in gummy o-ring mount boards like the Bakeneko60. Some additional spacebar options including 3u, 6u, and triple 2u were added. The pcb has two footprint locations for a JST connector, many breakout pins, and 19 rotary encoder locations. The MCU has been upgraded to a RP2040 with 32M-bit of flash memory. 6 7 8 * Keyboard Maintainer: [Feags](https://github.com/Feags) / [Krado Industries](https://kradoindustries.com/) 9 * Hardware Supported: Promenade pcb. Many 60% cases. 10 * Hardware Availability: [Krado Industries](https://kradoindustries.com/) 11 12 Make example for this keyboard (after setting up your build environment): 13 14 make kradoindustries/promenade_rp24s:default 15 16 Flashing example for this keyboard: 17 18 make kradoindustries/promenade_rp24s:default:flash 19 20 21 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 22 23 ## Bootloader 24 25 Enter the bootloader in 3 ways: 26 27 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 28 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead 29 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available