qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1613B)

      1 # Raindrop
      2 
      3 ![stacked](https://i.imgur.com/R2iPqjIh.png)  
      4 *Casing*  
      5 ![PCB Front](https://i.imgur.com/00TpL3nh.png)  
      6 *PCB Front*  
      7 
      8 60% sized keyboard with a gasket mounted plate and aluminium case, made by Laneware Peripherals.
      9 
     10 * Keyboard Maintainer: [Laneware Peripherals](https://github.com/laneware)
     11 * Hardware Supported: Raindrop PCB
     12 * Hardware Availability: Group Buy
     13 
     14 ## Layouts
     15 The Raindrop PCB can be configured in the following key layouts: 
     16 | Key Layout | Keymap | Diagram |
     17 | :---: | :---: | :---: |
     18 | Standard 60% | default | ![diagram_ansi](https://i.imgur.com/oibG44o.png) |
     19 | 2u Left Shift with Arrow Keys | arrows | ![diagram_arrows](https://i.imgur.com/cQ4Kwb5h.png) |
     20 | HHKB with 6.25 Spacebar | hhkb | ![diagram_hhkb](https://i.imgur.com/WU6gb1Qh.png) |
     21 
     22 Make example for this keyboard (after setting up your build environment):
     23 
     24     make laneware/raindrop:default
     25 
     26 Flashing example for this keyboard:
     27 
     28     make laneware/raindrop:default:flash
     29 
     30 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     31 
     32 ## Bootloader
     33 
     34 Enter the bootloader in 3 ways:
     35 
     36 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     37 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     38 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available