qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1177B)

      1 # large_lad
      2 
      3 ![large_lad](https://i.imgur.com/CQWAD2X.jpg)
      4 
      5 Starts with the standard US 104 key layout and adds more keys on top and on the left. Total of 148 keys, one of which is a rotary encoder. Includes two rows of function keys and a 3x7 grid of keys on the left. No LEDs.
      6 
      7 * Keyboard Maintainer: [Hyphen-ated](https://github.com/Hyphen-ated)
      8 * Hardware Supported: Custom open source PCB. 
      9 * Hardware Availability: DIY. PCB and plate design files available at https://github.com/Hyphen-ated/large-lad-keyboard
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make large_lad:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make large_lad:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 To enter the bootloader, there's two buttons to press on the blackpill board. Press and hold BOOT, press and release NRST, then release BOOT. Sometimes this randomly fails and you have to try again.