qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1192B)

      1 # Mini1800
      2 
      3 * Keyboard Maintainer: [LFKeyboards](https://github.com/lfkeyboards)
      4 * Hardware Supported:
      5   * [Mini1800 RevA](reva/) - Green PCB with AT90USB1286
      6   * [Mini1800 RevC](revc/) - Black PCB with AT90USB646; first public release
      7 * Hardware Availability: [LFKeyboards.com](https://www.lfkeyboards.com/)
      8 
      9 Make example for this keyboard (after setting up your build environment):
     10 
     11     make lfkeyboards/mini1800/reva:default
     12     make lfkeyboards/mini1800/revc:default
     13 
     14 Flashing example for this keyboard:
     15 
     16     make lfkeyboards/mini1800/reva:default:flash
     17     make lfkeyboards/mini1800/revc:default:flash
     18 
     19 ## Bootloader
     20 
     21 To reset the board into bootloader mode, do one of the following:
     22 
     23 * **Physical reset button**: Briefly press the button on the bottom of the PCB (between Q and W keys)
     24 * **Keycode in keymap**: Press the key mapped to `QK_BOOT` if it is available (`Fn`+`Right Shift`, then tap `Enter` by default)
     25 
     26 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).