readme.md (1062B)
1 # Mach 3 2 3 A 3x3 macropad with RGB underglow. 4 Note: It sets an output pin to high, which is the alimentation of the backlight circuit. 5 6 * Keyboard Maintainer: [etiennelepagel](https://github.com/etiennelepagel) 7 * Hardware Supported: Mach 3 from Mach Keyboards 8 * Hardware Availability: [Mach Keyboards Official Website](https://machkeyboards.com/) 9 10 ## Bootloader 11 12 Enter the bootloader in 3 ways: 13 14 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 15 * **Physical reset button**: Briefly press the button on the back of the PCB 16 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available 17 18 Make example for this keyboard (after setting up your build environment): 19 20 make machkeyboards/mach3:default 21 22 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).