qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1167B)

      1 # Chapter 1
      2 
      3 A exploded 65% with a rotary encoder designed by Rooke Design
      4 
      5 ![Chapter-1](https://i.imgur.com/GNI5KdW.jpeg)
      6 
      7 ## Support
      8 
      9 -   Keyboard Maintainer: [Cheezi](https://github.com/cheezi747)
     10 -   Hardware Supported: Chapter-1
     11 -   Hardware Availability: [Rooke Design](https://rooke.myportfolio.com/chapter-165-1)
     12 
     13 Make example for this keyboard (after setting up your build environment):
     14 
     15     make mechstudio/chapter1:default
     16 
     17 Flashing example for this keyboard:
     18 
     19     make mechstudio/chapter1:default:flash
     20 
     21 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     22 
     23 ## Bootloader
     24 
     25 Enter the bootloader in 3 ways:
     26 
     27 -   **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     28 -   **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     29 -   **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available