qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1357B)

      1 # BB Steno (BBS)
      2 
      3 ![BBS](https://i.imgur.com/XIjlzKOh.png)
      4 
      5 A bare-bones stenography keyboard. No bells or whistles. Simple, cheap, effective, steno.
      6 
      7 * Keyboard Maintainer: [Kyle McCreery](https://github.com/kylemccreery)
      8 * Hardware Supported: BBS v0.1, v1.1
      9   * v0.1 PCBs were miswired for WS2812 RGB LED strips. As the data pin is the same, a strip could still be added with some handwiring.
     10 * Hardware Availability: [BBS on MechWild](https://mechwild.com/product/bb-steno/)
     11 
     12 Make example for this keyboard (after setting up your build environment):
     13 
     14     make mechwild/bbs:default
     15 
     16 Flashing example for this keyboard:
     17 
     18     make mechwild/bbs:default:flash
     19 
     20 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     21 
     22 ## Bootloader
     23 
     24 Enter the bootloader in 3 ways:
     25 
     26 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (assigned to the top left key) and plug in the keyboard while holding it.
     27 * **Physical reset button**: Press and hold the boot0 button on the blackpill, tap  and release the nrst button on the blackpill, then release the boot0 button.
     28 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available.